Adjustable Warmth for the Stop-and-Go Reality of Cold-Storage Work
A freezer shift does not stay at one pace. You may walk and lift for twenty minutes, stop to scan or count inventory, pass through a dock opening and then return to a colder aisle. This carbon-fiber heated hi-vis jacket is designed around that changing rhythm—warmth when movement slows, room to reach when the work speeds up, and visibility around warehouse traffic.
Know in 30 Seconds Whether It Fits Your Job
A strong match for:
- Order picking, case picking and repeated aisle walking
- Loading, receiving and cold-to-ambient transitions
- Inventory checks with walking and stationary pauses
- Maintenance work requiring bending or overhead reach
- Forklift or pedestrian areas where Class 3 visibility is required
Consider heavier or specialized PPE for:
- Extended blast-freezer exposure with little movement
- Jobs requiring heated legs or full-body active warmth
- Flame-resistant, arc-rated or hazardous-location requirements
- Worksites without a battery charging and inspection process
The Cold-Storage Moments This Jacket Is Built Around
Cold-room discomfort often changes with the task, not only the thermostat. These are the moments workers recognize during a normal refrigerated or freezer-warehouse shift.
The first cold entry
Coming from a break room or receiving area can make the first few minutes feel especially sharp. Medium or High can be used for initial warm-up before reducing the setting as activity increases.
Picking, lifting and walking
As the pace rises, body heat rises too. A mobility-focused jacket lets the worker reach and handle cases without relying on excessive bulk.
Scanning, counting or waiting
The chill can return quickly when movement slows. Heat across the chest, shoulders and mid-back is positioned for these stop-and-go periods.
Moving through doors and loading areas
Door openings and temperature transitions change airflow throughout the shift. Three heat settings make it easier to adjust without removing the outer layer each time.
Best Matched to Active Cold-Storage Roles
Order picking
For workers who walk freezer aisles, scan locations, lift cases and reach overhead throughout the shift.
Loading and receiving
For repeated movement between refrigerated storage, staging areas and dock openings.
Inventory and quality checks
For stop-and-go work where the worker alternates between walking, standing and detailed inspection.
Maintenance and mixed-duty work
For equipment checks, overhead reach and jobs that move between different areas and activity levels.
Recognize Your Shift?
Choose your normal cold-storage layers and select a size in the purchase area. For mixed roles, mixed sizes or facility-wide orders, request a team recommendation before ordering.
Tested for the Questions Cold-Storage Buyers Actually Ask
The details below separate operating tests from runtime tests so the conditions are clear.
Cold-environment function test
The jacket was function-tested in a controlled 0°F laboratory environment. This test confirms operation under that controlled condition; it is not the condition used for the 8.5-hour runtime figure.
Low-setting runtime test
Up to 8.5 hours was measured on Low in a 32–41°F (0–5°C) environment. Runtime changes with temperature, battery condition, fit and setting changes.
Mid-layer reach test
Overhead reach was checked while wearing a mid-layer. Underarm gussets add room so the jacket can move without pulling sharply through the shoulders.
Forklift seat test
The battery pocket sits at the rear waist rather than the seat-contact area. In testing, it did not press between the wearer and the forklift seat. Individual fit should still be checked.
Function checked after washing
The heating system was checked after washing under the garment care procedure and remained functional. Always remove the battery, protect the connector and allow the jacket to dry fully before reconnecting power.
Heat placed where it is intended to help
Five zones are positioned at the left chest, right chest, left shoulder, right shoulder and mid-back to support upper-body and core comfort.
Movement, Visibility and Draft Protection
Underarm gussets
Extra panel room supports overhead reach, scanning and handling while wearing the normal mid-layer.
Bi-swing back
Shoulder pleats help the back panel move during lifting, loading and equipment checks.
High-visibility format
Fluorescent material and reflective tape support visibility around forklifts, pallet jacks and moving loads.
Hooded outer shell
The hood and 300D Oxford shell help manage drafts and changing conditions near freezer doors and loading areas.
Battery Runtime by Heat Setting
Low is the extended-use setting. Medium and High provide more heat but use the battery faster. The 8.5-hour result applies to Low in the stated 32–41°F test environment, not to every setting or every freezer temperature.
| Setting | Approx. heating temperature | Published runtime | Typical use |
|---|---|---|---|
| Low | 98°F / 37°C | Up to 8.5 hours at 32–41°F | Extended wear and active picking after warm-up |
| Medium | 107°F / 42°C | About 5 hours | Inventory, slower tasks and moderate exposure |
| High | 120°F / 49°C | About 3.5 hours | Initial warm-up or shorter higher-heat periods |
- Warm up, then reduce. Start at Medium or High when entering the cold zone, then move to Low as activity increases.
- Do not heat through heavy sweating. Lower the setting during fast picking, repeated lifting or long walks.
- Carry a spare battery when continuous heat is essential. High is not intended to cover a full eight-hour shift.
Choose the Size Around Your Cold-Storage Layers
Measure while wearing the base and mid-layers normally used at work. The jacket should allow overhead reach and bending without excessive looseness around equipment.
The fit should allow:
- Full forward and overhead reach
- Your normal base and mid-layer
- Comfort while bending, scanning and handling
- Easy access to the heat control and battery pocket
Recheck the size if:
- The shoulders pull during reach
- The rear-waist battery position feels uncomfortable
- The hem rises excessively while bending
- Loose material interferes with tools or equipment
For additional guidance, read the heated jacket versus traditional layering guide and the guide to planning for a battery change during a shift.
Included Items, Care and Key Specifications
Included
Heated jacket, 15,000mAh rechargeable battery and compatible charger.
Warranty
Listed 2-year heating-system warranty and 1-year battery warranty.
Returns
Review the current 30-day return terms and garment-condition requirements.
Team orders
Mixed sizes, quantity pricing and spare-battery planning are available through support.
| Heating technology | Carbon-fiber heating elements; five zones |
|---|---|
| Heating locations | Both shoulders, both sides of the chest and mid-back |
| Battery | 15,000mAh rechargeable lithium-ion battery included |
| Outer material | 300D Oxford polyester with PU coating |
| Waterproof rating | Listed 8,000mm rating under the stated test method |
| Visibility | Listed ANSI/ISEA Type R, Class 3 |
| Sizes | M, L, XL, 2XL and 3XL |
- Remove the battery before washing.
- Protect the power connector and close zippers and fasteners.
- Follow the sewn-in care label for this exact garment.
- Reconnect the battery only after the jacket and connector are fully dry.
- Stop use if the battery, cable, connector or garment is damaged or unusually hot.
Use boundary: Heated workwear supplements—not replaces—appropriate layers, gloves, footwear, warm-up breaks, training and other workplace cold-stress controls. The 0°F laboratory test confirms operation under a controlled test condition; it does not guarantee comfort or suitability for every 0°F job.
Built for the Cold-Storage Work You Already Know
For workers who pick, load, scan, inspect and move throughout the shift, this jacket combines adjustable upper-body heat, Class 3 visibility and a work-ready range of motion.
Cold-Storage Jacket Questions
Has this heated jacket been tested at 0°F?
Yes. The jacket was function-tested in a controlled 0°F (-17.8°C) laboratory environment. This is separate from the runtime test and should not be interpreted as a guarantee of comfort for every 0°F task or exposure period.
Under what conditions was the 8.5-hour runtime measured?
The up-to-8.5-hour result was measured on the Low setting in a 32–41°F (0–5°C) environment. Colder temperatures, battery condition, fit and frequent setting changes may reduce runtime.
Can I wear a mid-layer and still raise my arms?
Yes, when correctly sized. The jacket was checked for overhead reach while worn with a mid-layer. Underarm gussets and the bi-swing back provide additional movement room.
Will the battery press against a forklift seat?
The battery pocket is positioned at the rear waist rather than the seat-contact area. It did not create direct seat pressure in the tested forklift seating position. Body shape, jacket size and seat design vary, so each wearer should confirm comfort before a full shift.
Does the heating system still work after washing?
It remained functional in the product’s wash-and-function checks when the care procedure was followed. Remove the battery, protect the connector, follow the garment label and allow the jacket to dry fully before reconnecting power.
Where are the five heating zones?
The zones are located at the left chest, right chest, left shoulder, right shoulder and mid-back. The arms, hands, collar, legs and feet are not actively heated.
Reviews
There are no reviews yet.